| [Thermostat] | 溫控器 |
KSD060(Small cap)
Rated voltage: 250V
Working current: 15A (resistive load), the maximum load: 20A
Operating temperature: 50 ~ 200
Product life: 10000 times
Contact resistance: less than 50m ohm
Dielectric strength: AC50HZ, 2000V for 1 minutes without breakdown flashover phenomenon
Insulation resistance: > 100M.
The sudden jump temperature controller is a kind of bipolar and disconnect the FireWire,ground temperature controller, mainly used in household electric appliances big power, canimprove the safety of household electrical appliances. A manual reset this type of thermostat,also have automatic reset type.
The company is improved based on bipolar temperature controller on the original, overcome the original bipolar temperature controller of the greatest shortcoming -- cannot guarantee at the same time off bipolar bipolar temperature controller (because the original is using a plastic parts to drive two groups of contacts of the assembly, and the supporting plastic parts cannot be mechanical processing, can only use the manual processing, its efficiency, accuracy can not meet the requirements of production), proposed in the bipolar temperature controller is placed in the two branches of ceramic action bar, each branch is independent action rod to drive a group of contact assembly, so as to ensure that the two sets of contacts and action.This product has applied for national patent.
The product structure:
Orders and instructions for use:
The user must be according to the characteristics of their products, accurate determination ofthe actual temperature thermostat and a fuse body parts in thermal stability after, and through the matching test to determine the temperature controller and the temperature fuse action,and then put forward the action ordering temperature value.
When ordering, the user must specify the set temperature controller and a fuse body type,and specify the installation hole dimensions and terminal temperature controller size and shape.
The special requirements of users put forward in a really need, including the temperature andshape, the factory can be resolved through consultation.
When in use, the temperature controller and the fuse of whole sealing type should as far as possible so that the metal shell is immediately accused product installation position. The installation can not be the metal casing collapse or deform. In order to avoid operating temperature variation or affect other properties. Manual reset operation manual reset type temperature controller must be below the nominal operating temperature of 15 degrees, the implementation should be less than 30N, so as not to damage the reset mechanism.